NFS Howto Troubleshooting

==== Troubleshooting ====
===== Unable to See Files on a Mounted File System =====
First, check to see if the file system is actually mounted. There are several ways of doing this. The most reliable way is to look at the file ''/proc/mounts'', which will list all mounted filesystems and give details about them. If this doesn't work (for example if you don't have the ''/proc'' filesystem compiled into your kernel), you can type '''mount -f''' although you get less information.

If the file system appears to be mounted, then you may have mounted another file system on top of it (in which case you should unmount and remount both volumes), or you may have exported the file system on the server before you mounted it there, in which case NFS is exporting the underlying mount point (if so then you need to restart NFS on the server).

If the file system is not mounted, then attempt to mount it. If this does not work, see 7.3.
===== File requests hang or timeout waiting for access to the file. =====
This usually means that the client is unable to communicate with the server. See 7.3.b.
===== Unable to mount a file system =====
There are two common errors that mount produces when it is unable to mount a volume. These are:
*failed, reason given by server: ''Permission denied''.  This means that hte server does not recognize that you have access to the volume.
**Check your ''/etc/exports'' file and make sure that the volume is exported and that your client has the right kind of access to it. For example, if a client only has read access then you have to mount the volume with the '''ro''' option rather than the '''rw''' option.
**Make sure that you have told NFS to register any changes you made to ''/etc/exports'' since starting nfsd by running the exportfs command. Be sure to type '''exportfs -ra''' to be extra certain that the exports are being re-read.
**Check the file ''/proc/fs/nfs/exports'' and make sure the volume and client are listed correctly. (You can also look at the file ''/var/lib/nfs/xtab'' for an unabridged list of how all the active export options are set.) If they are not, then you have not re-exported properly. If they are listed, make sure the server recognizes your client as being the machine you think it is. For example, you may have an old listing for the client in /etc/hosts that is throwing off the server, or you may not have listed the client's complete address and it may be resolving to a machine in a different domain. One trick is login to the server from the client via '''ssh''' or '''telnet'''; if you then type '''who''', one of the listings should be your login session and the name of your client machine as the server sees it. Try using this machine name in your /etc/exports entry. Finally, try to '''ping''' the client from the server, and try to ping the server from the client. If this doesn't work, or if there is packet loss, you may have lower-level network problems.
**It is not possible to export both a directory and its child (for example both ''/usr'' and ''/usr/local''). You should export the parent directory with the necessary permissions, and all of its subdirectories can then be mounted with those same permissions.
*''RPC: Program Not Registered'': (or another "RPC error): This means that the client does not detect NFS running on the server.  This could be for several reasons.
**Check that NFS actually is running on the server by typing rpcinfo -p on the server. See (link to NFS setup docs).  If you do not see ''portmapper'',''nfs'', and ''mountd'', you need to restart NFS.  If you are not able to restart successfully, see symptom 9.
**Check to make sure you can see ''portmapper'' from the client. On the client, type '''rpcinfo -p''' ''server'' where server is the DNS name or IP address of your server.  If you get a listing, then make sure that the type of mount you are trying to perform is supported. For example, if you are trying to mount using Version 3 NFS, make sure Version 3 is listed; if you are trying to mount using NFS over TCP, make sure that is registered. (Some non-Linux clients default to TCP). Type '''man rpcinfo''' for more details on how to read the output. If the type of mount you are trying to perform is not listed, try a different type of mount.
**If you get the error ''No Remote Programs Registered'', then you need to check your ''/etc/hosts.allow'' and ''/etc/hosts.deny'' files on the server and make sure your client actually is allowed access. Again, if the entries appear correct, check /etc/hosts (or your DNS server) and make sure that the machine is listed correctly, and make sure you can ping the server from the client. Also check the error logs on the system for helpful messages: Authentication errors from bad ''/etc/hosts.allow'' entries will usually appear in ''/var/log/messages'', but may appear somewhere else depending on how your system logs are set up. The man pages for '''syslog''' can help you figure out how your logs are set up. Finally, some older operating systems may behave badly when routes between the two machines are asymmetric. Try typing '''tracepath''''' [server]'' from the client and see if the word "asymmetric" shows up anywhere in the output. If it does then this may be causing packet loss. However asymmetric routes are not usually a problem on recent linux distributions.
**If you get the error ''Remote system error - No route to host'', but you can '''ping''' the server correctly, then you are the victim of an overzealous firewall. Check any firewalls that may be set up, either on the server or on any routers in between the client and the server. Look at the man pages for '''ipchains''', '''netfilter''', and '''ipfwadm''', as well as the [http://www.linuxdoc.org/HOWTO/IPCHAINS-HOWTO.html IPChains-HOWTO] and the [http://www.linuxdoc.org/HOWTO/Firewall-HOWTO.html Firewall-HOWTO] for help.
===== I do not have permission to access files on the mounted volume. =====
This could be one of two problems.

If it is a write permission problem, check the export options on the server by looking at ''/proc/fs/nfs/exports'' and make sure the filesystem is not exported read-only. If it is you will need to re-export it read/write (don't forget to run '''exportfs -ra''' after editing ''/etc/exports''). Also, check ''/proc/mounts'' and make sure the volume is mounted read/write (although if it is mounted read-only you ought to get a more specific error message). If not then you need to re-mount with the '''rw''' option.

The second problem has to do with username mappings, and is different depending on whether you are trying to do this as root or as a non-root user.

If you are not root, then usernames may not be in sync on the client and the server. Type '''id''' ''[user]'' on both the client and the server and make sure they give the same UID number. If they don't then you are having problems with NIS, NIS+, rsync, or whatever system you use to sync usernames. Check group names to make sure that they match as well. Also, make sure you are not exporting with the '''all_squash''' option. If the user names match then the user has a more general permissions problem unrelated to NFS.

If you are root, then you are probably not exporting with the '''no_root_squash''' option; check ''/proc/fs/nfs/exports'' or ''/var/lib/nfs/xtab'' on the server and make sure the option is listed. In general, being able to write to the NFS server as root is a bad idea unless you have an urgent need -- which is why Linux NFS prevents it by default. See [[NFS_Howto_Security|NFS Howto Security]]

If you have root squashing, you want to keep it, and you're only trying to get root to have the same permissions on the file that the user nobody should have, then remember that it is the server that determines which uid root gets mapped to. By default, the server uses the UID and GID of nobody in the /etc/passwd file, but this can also be overridden with the anonuid and anongid options in the /etc/exports file. Make sure that the client and the server agree about which UID nobody gets mapped to.